What are the maintenance methods for a transparent ice machine?
Summary: The development prospects of the transparent ice machine industry are very good, as it brings many benefits to enterprises during use, making it highly favored by customers.
Release time:
2023-01-09
Transparent Ice MachineThe development prospects of the industry are very good, as it brings many benefits to enterprises during use, making it very popular among customers. To help everyone become more familiar with it, we will discuss the maintenance methods for the transparent ice machine. We hope this can help more people.
Many people are still unaware of some basic information about transparent ice machines, so as a manufacturer, it is necessary for us to briefly explain. In fact, the transparent ice machine also requires maintenance. For example, the air filter should be cleaned every 15 days. Soak the filter in a neutral detergent solution, clean it with a soft brush, and dry it before installation. Surface cleaning should be done every three months, using a cloth dipped in a neutral cleaning solution. Next is the cleaning of the water system. According to the operating procedures, disassemble the water system components for cleaning and disinfection every six months; maintenance should also be performed according to the operating procedures. For dust, compressed air can be used to blow from top to bottom; for oil, commercial coil cleaners can be used. You also need to clean the ice cubes in the refrigerator after using the transparent ice machine. When cleaning the ice maker, turn off the power and do not wash it directly with a water hose.
When using the transparent ice machine, check whether the circuit connections are loose, tightened, or properly plugged in. Additionally, it should be installed away from heat sources, in a place without direct sunlight, and with good ventilation. The ambient temperature should not exceed 35 degrees Celsius to avoid high condenser temperatures that can lead to poor heat dissipation and affect ice making. The ground where the transparent ice machine is installed should be solid and level, and the ice maker must be kept horizontal; otherwise, it may cause issues with ice removal and noise during operation. The gap between the back of the transparent ice machine and the left and right sides should be no less than 30 cm, and the gap at the top should be no less than 60 cm. During operation, a power supply should be used, with a dedicated line and equipped with a fuse and leakage protection switch, and it must be reliably grounded. Water used should comply with national drinking water regulations, and a water filtration device should be installed to filter impurities from the water, preventing clogging of pipes and contamination of the water tank and ice molds, which can affect ice making functionality. Always turn off the power when cleaning. Do not use a water hose to wash the machine directly. Clean with a neutral detergent, and do not use corrosive solvents such as acidic or alkaline cleaners.
After the introduction above, we have a further understanding of the maintenance methods for the transparent ice machine.Transparent Ice MachineIn the future, when we see it again, it will not feel unfamiliar, and there will not be frequent problems during use. That's all for today's content, and I believe there will be more exciting knowledge points to share. If you still have any questions about it, you can consult customer service here. I believe they will also help everyone answer their questions.
Recommend Blog
Online Message
Contact Us
Contact: Dorsey Li
Telephone: +86-18917941262
E-mail: dorsey@sh-icema.com
Address: No. 401 Luzhuang, Changye Road, Lijia Town, Wujin District, Changzhou City, Jiangsu Province
Powered by: www.300.cn | Tags